Home > Plastic Engineering Materials > ACETAL and DELRIN >
ACETAL
ERTACETAL C (POM-C) - Copolymer & ERTACETAL H (POM-H) - Homopolymer (DELRIN)
both available in White (Natural) and Black
- high mechanical strength, stiffness and hardness - excellent resilience
- good creep resistance - high impact strength, even at low temperatures - very good dimensional stability
- good sliding properties and wear resistance - excellent machinability
- good electrical insulating and dielectric properties
- physiologically inert (suitable for food contact) - not self extinguishing
Acetal copolymer is more resistant against hydrolysis, strong alkalis and thermal-oxidative degradation than the Acetal Homopolymer. Homopolymer however, has higher mechanical strength, stiffness, hardness and creep resistance as well as a lower thermal expansion rate and often it also presents a better wear resistance.
| Acetal Plate (sheet)
Acetal Plate & Sheet in thicknesses 2mm - 80mm. Available in Black or White (Natural). |
| | Acetal Rod
Diameters available 5mm to 200mm diameter in a variety of lengths |
| | DELRIN Plate (sheet)
Delrin Plate (sheet) available in thicknesses 8 - 50 mm. Most sizes in Black or White (Natural). |
| | DELRIN Rod
DELRIN Rod. Available in Diameters 6mm - 200mm. Available in White (Natural), some sizes also available in Black. |
| | Ertacetal H-TF (DELRIN AF)
DELRIN AF (Ertacetal H-TF) is an Acetal blended with TFE fluorocarbon Fibres giving low friction and lomg wear life. |
|
« Back
| 